Premium Garage Epoxy Flooring in Houston

A standard two-car garage (about 450 sq ft) runs $2,925–$4,950 for a full flake system with a polyaspartic topcoat. Three-car garages typically run $4,550–$7,700, and larger or heavily damaged slabs run higher. Pricing works out to $6.50–$11 per square foot depending on the system and how much concrete repair the slab needs, with a $2,200 project minimum. Metallic epoxy starts at $10 per square foot.

A professionally installed epoxy and polyaspartic system lasts 15 to 20 years or more in a residential garage. That depends almost entirely on surface preparation — a floor installed over diamond-ground concrete lasts decades, while the same coating over acid-etched or unprepared concrete often fails within one to three years.

You can walk on the floor 24 hours after the topcoat goes down, and park vehicles on it after 72 hours. The install itself takes one to two days for most residential garages. Polyaspartic systems cure fast enough that we can often finish a standard two-car garage in a single day.

The best system uses both. Epoxy is the ideal build coat because it is thick, rigid, and bonds aggressively to prepared concrete. Polyaspartic is the ideal topcoat because it is UV stable, cures fast, and resists hot tire pickup. Using polyaspartic alone is thin and expensive; using epoxy alone will amber and can lift under hot tires in the Texas climate.

Peeling is almost always a preparation failure, not a product failure. Coatings peel when they are applied over a slick, unopened, or contaminated surface — most commonly after acid etching or pressure washing instead of mechanical grinding. We diamond grind every slab and carry a 15-year written adhesion warranty against peeling and delamination.

Yes, and most of the floors we coat are. Cracks are cut into a V-groove and filled with structural polyurea, spalled and pitted areas are rebuilt, and oil-contaminated concrete is degreased and, where necessary, mechanically removed. The repairs are completed and cured before any coating goes down.

A full flake broadcast creates a naturally textured surface with meaningfully more grip than smooth sealed concrete. For pool decks, commercial kitchens, or entryways where standing water is expected, we can add an aluminum oxide or polymer grit anti-slip additive to the topcoat.

Yes. We install commercial epoxy for retail, restaurant, showroom, medical, and light industrial spaces, and high-build systems engineered for forklift traffic and heavy point loading in warehouses. Commercial work is scheduled on nights and weekends so your operation does not lose a day.

We install epoxy flooring throughout the greater Houston metro, including Cypress, Katy, Tomball, Spring, The Woodlands, Sugar Land, Memorial, Bellaire, West University, River Oaks, Pearland, Richmond, and Jersey Village.

A coated garage floor stops concrete dusting, resists oil and chemical staining, cleans with a mop instead of a degreaser, brightens the space by reflecting light, and reads as finished square footage to buyers. Against a 15 to 20 year service life, a professionally installed system generally costs less per year than repeatedly cleaning and resealing bare concrete.